Hobart Stero High Temperature Door Type Dishwasher (SD3‑2)


Stero logo


Financing Options


Durability and simplicity are at the heart of Stero door-type dishmachine engineering. From installation to day-to-day operation and dishmachine preventative maintenance, our units are reliable and easy for your operators to use. All stainless steel construction, interchangeable upper and lower rinse arms, door actuated starts and large scrap accumulators are just some of the features you’ll enjoy with Stero door-type dishmachines.

The Stero SD3-2 is a pass-through dishwasher with hot water sanitizing  and straight or corner orientation. With hot water sanitizing, this unit can wash 58 racks per hour.  Stero is a Hobart brand and is backed by Hobart service and warranty.

  • .85 gallons per rack
  • 58 racks per hour – hot water sanitizing
  • Timed wash cycles for 1, 2 or 4 minutes
  • Digital control status
  • 180° final rinse assurance
  • Interchangeable upper and lower wash and rinse arms
  • Automatic tank fill
  • Door actuated start
  • Automatic drain closure
  • Exhaust fan control and booster activation included
  • Stainless steel construction
  • Error notification
  • Straight-through or corner operation
  • Pressure gauge
  • Rate of Rinse Flow – Gallons per Minute – at 20 PSI Flow Pressure: 5.1
  • Rinse Cycle – Gallons per Rack – at 20 PSI Flow Pressure: .97 – 180°F Minimum
  • Peak Rate of Drain Flow – Gallons per Minute (Initial rate with full tank): 14
  • Incoming Water Temperature Required (Minimum): 110°F
  • Wash Motor H.P.: 2
  • Electric Heating Unit (Regulated): 5 KW
  • Electric Booster Heater: 8.5 KW
  • 3PH/208V or 1PH/208V
  • Overall dimensions: 66-1/2″H x 28-3/4″W x 34″D
  • Net weight: 270 lbs

cULus logo   NSF Certification Logo